The fully variable trapezoidal girder formwork from PASCHAL is the top product when it comes to circular formwork systems. It stands out through best formwork times, exceptional adjustment range, as well as perfect curves and dimensional accuracy.
Clamp holders
All large-size and midi panels of the LOGO.3 and LOGO.pro wall formwork are equipped with clamp holders for the LOGO wedge clamps.
When dismantling and setting the formwork, the connecting pieces can be conveniently parked on the panel, making them immediately available for the next location – that saves on transport and ensures shorter setting and stripping times. The number of clamp holders attached is always adapted to the number of connecting pieces needed.
Centrally positioned on the middle crossbeam, the clamp holders always ensure optimal accessibility from all sides – no matter in which direction panels are being formed or added on.
Fully plastic formwork panels
The LOGO.3 formwork panels can also be supplied with fully plastic formwork panels upon request. The exceptionally smooth, moisture-resistant and UV-resistant surface achieves a concrete appearance free of discoloration, stains and rippling.
Hot-dip galvanizing
In addition to the standard powder-coated version, the formwork elements are also available with a hot-dip galvanized surface. This guarantees optimum corrosion protection and an even longer service life even in the toughest applications.
PASCHAL is the unrivalled partner for efficient solutions for foundations. The narrower panel widths and shorter panel heights of LOGO formwork are optimal for foundations or base plate formwork.
Large panels, fewer connecting pieces and easy handling are the defining features of LOGO wall formwork from PASCHAL. Thanks to the well-balanced range of panel dimensions, LOGO can be used to form any layout very economically. Exposed concrete surfaces are also easy to create.
No other formwork system requires fewer ties than LOGO.3 wall formwork. Targeted use of filler and large-size panels can save up to four ties in corner areas.
Thanks to the lighter LOGO.alu version from the LOGO range, even storey-high formwork elements are easy to move manually. This makes LOGO.alu ideal for any building site without a crane and for formwork in existing buildings.
The LOGO.pro wall formwork system can easily be converted from double-sided to single-sided anchoring using a sophisticated changing system. Thanks to the use of standard material, LOGO.pro impresses with its simplicity and cost efficiency.
Modular/GE universal formwork is the tried and tested formwork for systematic modular-design formwork. Its flexibility makes Modular/GE universal formwork suitable for foundations, walls, columns, beams and shafts, for both small or large areas.
As a further development of the tried and tested Modular/GE universal formwork, the modern NeoR lightweight formwork is a lighter and at the same time more stable manual formwork, which will win you over with its simple handling.
For circular, oval, rectangular or square column cross-sections: PASCHAL provides optimum system formwork for effective and economical concreting without concrete bleeding.
The flexible yoke-beam cross-beam slab formwork is impressively easy to adapt to any layout, suitable for any slab thickness and is made up of lightweight individual components. This makes PASCHAL Deck ideally suited for ceiling construction in residential and industrial buildings.
The PASCHAL dismantling inside corner post for LOGO wall formwork, NeoR lightweight formwork and Modular universal formwork, enables exceptionally fast and easy assembly and dismantling of shafts, because the complete inner core formwork is realised with just one crane lift.
The wide range of combination options means that the PASCHAL TG 60 can be used as shoring, stair tower or reinforcement scaffolding in structural, civil and bridge engineering.
All PASCHAL formwork systems are easy to combine using standard connecting pieces, no additional accessories are required. This means that even complex combinations and elaborate cross-sections can be realised without any shuttering on site.
Plate with ball-and-socket joint
The Paschal plate with ball-and-socket joint DW15 10x14 cm is used as a nut for our DW15 tie rods in all formwork systems, making it possible to introduce force from the exposed concrete pressure via the formwork into the tie rod. Thanks to the two wings, the plate with ball-and-socket joint can easily be struck in with a hammer. For removal, the plate with ball-and-socket joint can also be loosened and turned away with a hammer blow.
Permissible anchor force 90 kN
1.29 kg light
Rapid assembly and dismantling
Forged cast part with fully chrome-plated surface
Easy to operate from behind
Integrated nail hole
Our experts look forward to talking with you directly, and as always we are available for discussions and questions - you can use either our live video chat or the contact form.